Hello! With you АвтоЮвелир
My name is Ruslan. Today we will repair
the deck lid
The dent has several serious creases
But I think they will not make it difficult for us
First we heat it up
so as not to break the paint during the repair.
We start to heat the dent
The more we heat up the dent,
the better it back to place.
All of edges of the dent...everything needs to be warmed up.
to the maximum.
We begin to push from the edge
Not in to place of the crease,
where a tensions,
because it can lead to cracked paint
There is a crease on the inner bend
It will be necessary to pushing.
Now we can knocking down high spot.
There is already a direction up where the metal will go.
We can fix the lid and start to knocking down.
Now we will not hurry up
We will knock down this spot and show that there are no dents that can not be fixed.
Everything will be fine.
Now you can see in the camera
this spot is leveled.
there are small remnants
but I will not spend time on this.
Just i'll show it in the reflection of a lamp
It's not this place
This one that goes right here
You can see if there are any dreadful dents
No! All dispersing smoothly.
We also continue to work with all the high spot
I'll show you here
in this place
This dent can be considered as a separate
It will not change anything in the other part.
Now I will show the finishing rapair work
on the example of this place, and how it happens.
We will change the position of the lamp and repair it at different angles.
We have already passed this part.
Remains just to polish scratches,
which were formed by the impact.
There was nothing touched
Below is the place of repair
Repair of the dent on the deck lid is complete,
you can see the result
Video specially shown before polishing, so it was clear,
that everything was done without painting
If you want to know more about our profession,
subscribe to the channel
If you want to become an expert,
our doors are open
in St. Petersburg, Kharkov, Donetsk, Sochi
All good luck! See You!
Không có nhận xét nào:
Đăng nhận xét