BOSCH Drill Press - Steel and Wood Test
Drill 10 mm - speed 1 (500 rpm) - wood 7 cm thick
End of drilling at 01:30 - drilling time: 1m12s
3.34 and 3.62 mm on the edge, so quite precise (little difference)
Forestry bit 15 mm - speed 1 (500 rpm) - wood 5 cm thick
End of drilling at 03:40 - drilling time: 1m38s
10 mm drill bit (bosch HSS-CO) - speed 1 (500 rpm) - steel 2 mm thick
5 seconds (approximately)
10 mm drill bit (bosch HSS-CO) - speed 1 (500 rpm) - steel 15 mm thick
End of drilling at 05:40 - piercing time: 1m20s
Thank you for leaving your opinion and see you soon
Không có nhận xét nào:
Đăng nhận xét