Chủ Nhật, 4 tháng 3, 2018

Waching daily Mar 5 2018

Welcome to the Nespresso Assistance video on cup size programming for your Lattissima Touch machine.

On this Nespresso machine you will find 6 beverage functions:

Lungo, Espresso, Ristretto, Latte Macchiato, Cappuccino and warm milk froth.

These preparations stop automatically when you have reached a specific volume.

You can tailor the volume of these beverages to better suit your preferences.

Turn on your machine. It heats up for approximately 25 seconds.

Lift the lever completely and insert a capsule. Close the lever and place a cup under the coffee outlet.

To begin, press and hold the desired coffee selection for 3 seconds.

This will enter programming mode, the button will blink fast and brewing will start.

Keep the button pressed for the entire process as the coffee flows.

Only release the button when the desired volume is reached.

It will blink three times to confirm the new volume has been stored.

From this moment on, with one press on the button, the beverage will automatically flow to the programmed volume.

Programming a Cappuccino

Open the steam connector door and put the Rapid Cappuccino System in place.

It will take 15 seconds to heat.

Then place a Cappuccino cup under the coffee outlet and adjust the milk spout by raising it to the right level.

Adjust the texture of milk froth as required by turning the regulator knob left or right.

We recommend using Minimum milk froth texture for a Cappuccino and maximum milk froth texture for a Latte Macchiatto.

To begin, press and hold the Cappuccino button for 3 seconds.

This will enter programming mode, the button will blink fast and and warm milk froth will start

Keep the button pressed for the entire process as the warm milk froth flows.

Only release the button when the desired volume is reached.

Press and hold the same button for coffee brewing to start.

Release the button when the desired coffee volume is reached.

It will blink three times to confirm the new volume has been stored.

From this moment on, with one press on the cappuccino button,

the warm milk froth and coffee will automatically flow to the programmed volume.

For more infomation >> Nespresso Lattissima Touch - How to Video - Cup size programming - Duration: 2:51.

-------------------------------------------

Top 20 Amazing Cake Decorating Tutorial 😍 Most Satisfying Cake Decorating Video! Best Cake Style - Duration: 18:01.

Thanks for watching!

Thanks for watching!

Hope you have a great time

Hope you have a great time

Please, like, share, comment and subscribe for more!

Please, like, share, comment and subscribe for more!

For more infomation >> Top 20 Amazing Cake Decorating Tutorial 😍 Most Satisfying Cake Decorating Video! Best Cake Style - Duration: 18:01.

-------------------------------------------

Anh Sợ Nhìn Em Khóc - The Men [ Lyric Video HD ] - Duration: 4:45.

For more infomation >> Anh Sợ Nhìn Em Khóc - The Men [ Lyric Video HD ] - Duration: 4:45.

-------------------------------------------

Nespresso Lattissima Touch - How to Video -First Use - Duration: 2:40.

Welcome to the Nespresso assistance video on how to use your Lattissima Touch machine.

Before the very first use of your Lattissima Touch machine, we suggest you follow some simple instructions.

To start, remove the protective film and the water tank.

Rinse the water tank before filling with fresh, drinkable water up to the maximum level.

It is important to set the water hardness correctly in order to descale the machine at the correct frequency.

This will ensure the proper functioning of your machine over its lifetime.

After plugging into the main outlet, switch the machine on.

For the first few seconds the automatic power off and water hardness settings are indicated with a steady light.

Place a container under the coffee outlet and press the Lungo button to rinse the machine.

Repeat this operation three times.

You will then need to disassemble the Rapid Cappuccino System for cleaning.

Begin by removing the milk container lid and unplugging the milk aspiration tube.

Remove the milk froth regulator knob by turning it until it's in the "REMOVE" position and pull it upwards.

Then remove the Rapid Cappuccino System connector by unlocking it from 'LOCK' to 'UNLOCK' and pull it off.

Finally, remove the milk spout by gently pulling it off.

Clean all components on the upper level of your dishwasher.

In case a dishwasher is not available, soak all the components in warm water

(approximately 40° C or 104° F) together with mild detergent for at least 30 minutes.

Rinse them with drinking water and then dry with a clean damp cloth.

Your Lattissima Touch machine is now ready.

You can begin to enjoy your machine and the Nespresso coffee quality, cup after cup.

For more infomation >> Nespresso Lattissima Touch - How to Video -First Use - Duration: 2:40.

-------------------------------------------

Nathaniel Rateliff & The Night Sweats - You Worry Me (Music Video) - Duration: 3:46.

For more infomation >> Nathaniel Rateliff & The Night Sweats - You Worry Me (Music Video) - Duration: 3:46.

-------------------------------------------

Nespresso Lattissima Touch - How to Video - Water Hardness - Duration: 2:00.

Welcome to the Nespresso Assistance video on setting the water hardness on your Lattissima Touch machine.

To optimize descaling intervals and keep the machine well serviced for optimal cup quality,

we recommend that you set the water hardness on your machine.

According to your consumption profile as well as the water hardness you have set in the machine,

the machine will trigger a descaling alert visible on the top of the machine

Begin by taking the supplied water hardness sticker Found in the User Manual and placing it under running water for a second.

The number of squares will indicate the water hardness level.

The results can vary from 0 to 4 red squares:

0 squares for the first level which is for a very soft water

4 squares for level 5 which is for a very hard water

Switch the machine on and remove the milk jug if attached.

Press the Latte Macchiato and warm milk froth buttons simultaneously for 3 seconds to enter the menu mode.

The descaling AND clean alerts will start blinking.

Touch the Latte Macchiato, Cappuccino and warm milk froth buttons in a continuous movement.

The water hardness setting is indicated by the corresponding buttons which are steadily lit.

Within 15 seconds you can set the desired value by pressing the corresponding button.

They will blink three times to confirm the new value.

The menu exits automatically and the machine returns to ready mode.

Your Lattissima Touch machine is now ready.

Không có nhận xét nào:

Đăng nhận xét