hello everybody its Jen I hope you're having an awesome day I am back with
another design team project for kindred stamps today I'm using the fun
video games brother stamp set that is absolutely adorable with all these
little characters the mushrooms the princess and of course our two brothers
so I'm gonna start off with some Copic coloring I did all of the skin tones the
same so I went ahead and colored all but one before I started filming now all of
these characters have very fair skin so I'm using a thirteen eleven and a 0-0
two color in their skin I'm gonna start off with our first video game brother
here and I'm going to have him with a red hat and shirt so I just outlined
where I wanted my darkest shadows with my lightest color which is the r22
then I went in with the darkest which I'm using r29 and for my mid-tone I'm
using r24 and this is going to give me a really bright almost a tomato red
type of color so I'm quickly just going to do his shirt this part of the image
is very tiny so I'm barely touching my marker to the paper here Reds bleed so
easily so you just want to be really careful and like I said I'm just barely
touching the paper so for our little mushroom characters here I'm actually
going to be shading only to the one side so almost like there's a light source
coming from the right I normally don't really worry about my light sources and
just color but I thought I would give a hand here at having a little bit of a
light source
but out the lines there so I'm using the chisel end of my colorless blender just
to quickly clean that up now I wanted to give him some bright blue overalls so
I'm using B 06 B 04 and B 02 for his brother above him I'm going to use a bit
darker of Blues after I get the jewels done on our princess so this combination
is new to me and I really like how it is almost a
navy or denim I'm using b99 b95 and b93 I'm going to do the coveralls on
our little guy here and the vest on our little mushroom character so it was very
light handed the first go around because I hadn't used this color combination
before once I saw it I wanted to have it a little bit darker so I went over it a
second time for the princess I'm going to be using my favorite pink combination
of r 85 r 83 and r 81 so the top of her dress and the little pieces that
sit on top of her skirt will be the darkest so I'm using all three of those
colors for her little shoulders and the arms of the dress as well as the skirt
I'm just going to do a two color blend with our 83 and already one
now I did want to darken up those darker spots so I just went back with the are
85 and the are 83 now don't pay attention to her hair coloring here I
colored it with flicking motion so that there would be texture and I just didn't
feel like it had the right feel for our little video game character here because
these are more of a cartoon image so I'll come back to that in a little bit
I'm working on the green now for our little guy here I used yg 17 yg 25 and
ygo 3 for my green color combination now I'm doing the hair I wanted this to be a
really dark brown so I'm using a 49 a 47 and a 25 I love their little mustaches
they're so stinking cute for the mushroom I'm going to do the top part
and the feet with a two color blend of a 25 and a 23 I'm also going to do all of
the characters shoes in the same color
really simple and then I'm going to bring in some lighter colors for the
body of the mushroom I'm using a 53 and a 51 and that will give a nice contrast
now I'm gonna work on the white portions of our characters so I want them to have
some shadows so they have dimension so I'm using C 3 C 1 and C 0 of 0 their
hands and her arms are quite tiny so again I'm just barely touching that to
the paper this will give some nice shading around our characters and I did
forget to color the little mushroom guys pants so it almost looks like a diaper
but I'm gonna come back and finish that before I start putting the card together
so here's where I do that I catch that I forgot that color that up really quickly
just adding the red into her crown and now I'm going to work on a very easy
background using distress oxides so I really want the characters to take the
forefront in this card so I'm just using some post-it tape here the majority of
my scene is going to be sky so I'm using distress oxide and tumbled glass and
salty ocean I sped this up super quick because there's nothing special here
just really trying to get a first coat of that tumbled glass down before I
bring in the salty ocean this is a panel of Bristol smooth cardstock I find it
the easiest to blend on with stress oxide inks or any inks for that matter
I'm just working this back and forth adding layers until I get the color that
I'm going for I want it to be quite light in the middle
I'm gonna peel that up a turn around my laminated piece of paper here now I'm
going to work on the grass someone use twisted citron and mowed lawn this
posted state post-it tape at this point was not really adhering very well but I
didn't want to get a new piece so I just kind of dealt with it trying to hold it
in place but you will see it slips quite a bit so first I'd lay down the two
twisted citron gosh that's always a tongue tie
and then I'm bringing in the mowed lawn just on the very bottom I'm just gonna
fix up where I got my fingers in the ink I'm not gonna add any water for any
detailing or distressing or oxidization I'm just gonna leave it very clean and
simple so I did cut that out with a stitched rectangle die before I add my
characters to make my scene I'm going to adhere my panel down on to my card base
which I just make out of a hundred and ten pound card stock fix up those
fingerprints again and here's all the little characters so here's the
difference between the two princesses the one on the left is the one I'm going
to use which has has no flicking motions I also used a lighter color combination
than the first time it didn't like the three colors I chose the first time so I
used Y 15 Y 13 and Y 11 for her hair and just colored it in without any flicking
motion so I did color in some of the added elements to make our scene
off-camera so you can see here I have the bricks and the little coin box and
then some of the tunnels I'm going to adhere down my brick and the little coin
box with liquid adhesive I want them to be flush to the panel
I'm also going to do that for the tunnels as well for all the characters I
am going to pop them up on some fun foam or some foam adhesive I did cut these
out by hand and I cut them right to the line so just to make it look like
there's no jagged edges I am going to outline those with my memento tuxedo
black marker I had done all the rest of the other images I just wanted to make
sure I remembered to tell you that that was one of the steps that I took and it
just really makes it look like they've been cleanly cut so here's where I'm
going to add the little tunnel with our flower again just using liquid adhesive
for that I love the brightness of this card and I think it would make anybody's
day if you were an old-school video gamer it's gonna get that last tunnel
down and then I'm going to add my little brother one brother I guess he'd be
brother number two the red guy would be brother number one I'm gonna add my
princess and then I'm going to finish the inside
of the card so no sentiment on the front but the inside of the card will say
thank you for helping me reach the next level which i think is such a fun
thank-you card so I'm just going to stamp that with my versafine onyx black
ink I'm gonna try to Center that up into the middle of the inside of the card
base and then I'm going to add some of the additional elements that I had
colored up and didn't use on the front so I'm going to use our little mushroom
guy here I'm gonna have him holding a gold coin and then I'm going to put one
of the coin boxes right above the sentiment and I feel like that really
kind of draws your eye to the sentiment so super fun card today I hope you guys
have enjoyed I'm just gonna add some finishing details here I'm gonna use my
white signo gel pen to add some highlights it wasn't quite
working so one of the things you can do to warm it up is just rub it on your
finger a little bit I love adding detail to my cards I feel like it just really
helps make them come to life you can add a couple more to the leaves there and
then that will be it for the white gel pen now I'm bringing in my black glaze
pen and I'm going to add this to all of the eyes it raises the eyes a little bit
and makes them super shiny with a gloss finish and I really love adding that to
my characters as well so as the final touch I wanted to add some shading under
my images so they looked like they were grounded so I used my c5 right
underneath the images blending that out with the c3 and then I'll blend that out
even more with my c1 and you can see how that just makes it look like they're
actually standing on the ground that's my card for today everyone have a great
date and I'll see you back really soon take care everybody thanks for joining
me bye
Không có nhận xét nào:
Đăng nhận xét